PH-100A /PH-200L /PH-200LC

Shimpo Tachometer is devised by Nidec-Shimpo as a durable tachometer with the convenience of handheld portability. Shimpo Tachometer (PH-200L/PH-200LC) is performing measurement on a non-contact basis from a position separated from the center of rotation of the object to be measured. Values can be converted and displayed in various units such as rpm, m, yards, feet, and inches. The LCD can display a five-digit value with a digit height of 12 mm. In addition to measured values, units and other information can be displayed. It can store maximum, minimum, and last-measured values plus 10 other measurements.

The Shimpo Tachometer  are commonly used in measuring actual lathe torque on threading and turning, machining velocity, quality inspection on electric motors, maintenance and many more.

DT-311N / DT -311P

The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source.

A wide measuring range

The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.

Provided with a phase adjustment function

It is possible to move an image while maintaining synchronization.

The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.

Provided with a memory function

The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.

The Shimpo TNP torque meter is a precision instrument that measures OPEN and CLOSE torque values for various applications. As a cap torque analyzer, the TNP repeatedly determines bottle closure and breakaway torque. It has a wide memory capacity capable of storing 1,000 data points in addition to Average, Maximum and Minimum values. A HI-LO comparator feature can be utilized for a large batch testing to ensure overall product quality.

The TNP torque meter is USB capable for computer testing. Combined with the free Digitorq Software, additional analysis and testing can be performed.

The TNP is a portable device powered with internal rechargeable batteries or through an AC Adpater/charger. Designed with a small footprint it can easily be transferred to maximize use around the shop floor or the laboratory.

A series of high-performance digital force gauges (push-pull gauges) with capacities ranging from 2 N to 1,000 N, which can measure pressing force, tensile force, peel force, etc. A USB interface is provided for connection to a computer. In addition, the specialized add-in software TORIEMON USB enables data transfer to Excel and allows data editing on a PC.

High-performance digital force gauges

with enhanced communication functions

Vast improvements in the data management function compared with the pre-existing FGP Series. FGPX Series digital force gauges can be used for a wider variety of tests with these additional functions: compatibility with Digimatic signals; an LED indicator function, which indicates the results (HI, LO, OK) using LEDs; a hold function, which holds the indicated value using an external signal; and a zeroing function, which enables a tare deduction setting using an external signal.

Shimpo Digital Tension Meter DTMX is devised for precision testing of tension with digital gauging sensor and measurement data output combination. With Shimpo's line of highly versatile DTMX Series, you can have a complete measurement system capable of handling the most precise testing applications by using method similar with tensile testing. The unit can measure standard wire such as string, steel, snare, copper, tape, film, chains, plastic fibres wire, flux, and especially rare and expensive material such as gold wires.

Your investment on Shimpo Digital Tension Meter DTMX Series, will allow you variety of measurement modes on various type of material. The data can also be transferred to a personal computer for data analysis on spreadsheet or for direct print through a USB port. The sturdy enclosure is made of casted aluminium for lightness, resistant against shock and static electric with rigidity for both mounted and hand-held application. For cheaper alternative without data connectivity, you can also opt for DTMB series.

Major application for this versatile tension meter includes; Elastic string, Gold & Silver metal string of φ0.15 or smaller, Coated optical fibre, Synthetic fibre wire winder, Optical fibre, Optical fibre binder, Carbon fibre, Copper wire binder, Steel wire binder, Film for capacitor, Food film Brass wire of up to φ0.3, Copper coil, Magnetic tape, Carbon fibre, wool-textile string, Steel wire of up to φ0.1, Copper filament of W20×0.1t. and Tire cable.

Shimpo Digital Tension Meter DTMX Series Features:

• Versatile application as the unit can measure standard wires; 1.String 2.Steel 3.Copper, and 2 other sample wires. The change-over can be made by the combination of set switch, wire type selector switch, or field adjustment switch.
• The highest accuracy of ±1% can be achieved.
• Max. min. peak, the last values are stored automatically (100 data can be stored with DTMX)
• Selectable modes of either 0.5,1,2,4 sec. can also be easily resetted (at factory, 1 sec. is preset.)
• Each model is available in types; standard and high function type from 200gf or less up to 20kgf.
• Can also be ordered with precision wire for your in-house calibration and precision comparator.
• Analysis software with graphics TMT-DTm can also be downloaded for free on manufacturer links.
• Standard delivery includes; carrying case, AA batteries and manual conformation.

The FGS-50H /FGS-50L manual test stand offer the ability to obtain accurate, consistent results without the high cost of a motorized system. Our hand-lever operated test stands are ideal for rapid testing applications.

The FGS-100L manual hand-lever test stand has a 200 lb. (100 kg) capacity and can ensure accurate, consistent test results with the addition of a digital or mechanical force gauge.

These stands are designed for precision, balance, and durability. Therefore they are perfectly suited for measuring a limitless range of materials such as, wire, spring, plastic, paper cord, tubing, glass and composites.

Versatile bottom mount mounting plate permits acceptance of both standard and custom-made attachments

Adjustable clearance setting enables testing on a wide range of samples

Precision gear movement provides a consistent linear motion that produces repetitively accurate results

Modular, compact design reduces footprint, weight and cost

Sturdy all steel construction allows exceptional durability and extended life of the product

Compatibility with many vendors' force gauges facilitates flexibility when replacing older test stands

Optional digital length meter added to stand creates deflection measurement testing for applications such as spring rate testing

A wider range of loads

Loads ranging from 2 to 2,500 N (0.2-250 kg) can be measured. Various types of digital force gauges can be mounted.

Note: Digital force gauges are sold separately.