THINKY
-
![]()
THINKY -SR 500 Solder Paste Mixer
Button- Can immediately prepare cold stored solder paste without bringing it back to room temperature
- By optimizing the mixing recipe, viscosity preparation and temperature preparation for solder paste is easy.
- ・Removes large air bubbles in the paste, which are considered the cause of solder paste defects.
- Handles commercial 500g solder paste containers as is
- Restirs and redisperses solder paste that has been used
- Supports solder paste in syringes by using the optional adapter
- ・CE certified model is available
- Features
- Can prepare uniform viscosity in a short time for solder paste just taken from cold storage without bringing it back to room temperature. Metal particles with high specific gravity such as solder particles settle to the bottom of containers in cold storage and cause differences in material viscosity. The SR-500 regulates the viscosity of solder paste in a short time, with uniform viscosity from top to bottom. Also, because it can remove air bubbles thought to cause spattering of solder balls, it contributes to reducing the defect rate.
-
![]()
THINKY ARE-310 Planetary Centrifugal Mixer
Button- Supports a wide range of materials, including high-viscosity materials and nano fillers
- The 2 modes of mixing and deaeration achieve dispersion and deaeration of high-viscosity materials in a small amount of time
- Cold-insulated, heat-resistant adapter enables support of various material characteristics
- Wide variety of adapters for using various containers
- ・Memory and step-operation functions for controlling and executing operating conditions
- ・Unique air-cooling system
- Feature
- The centrifugal force of over 400G enables simultaneous processing of mixing, dispersion, and deaeration of various materials from low to high viscosities for general purposes.
- Furnished with a deaeration mode that enables high-precision deaeration, this model shows excellent performance in deaeration of high-viscosity adhesives and materials whose viscosities are increased by added fillers. A wide variety of materials and uses are supported by using adapters for various containers. It is employed for production or research and development where small amounts of materials are prepared.
-
![]()
THINKY ARV-310 Planetary Centrifugal Vacumm Mixer
Button- Simultaneous mixing, dispersion, and removal of foam at submicron level. Can handle low- to high-viscosity materials.
- The rotation and revolution method and the vacuum decompression function enable high-precision defoaming in a short time without spilling during operation.
- Real-time display of progress and operation status on touch panel.
- Twenty recipes can be registered by touch operation.
- The communication function (RS-232C connection) contributes to traceability improvement by operation and data acquisition using an external terminal.
- ・CE certified model is available
- Feature
- Equipped with vacuum decompression function in addition to the rotation and revolution mixing system. No overflow occurs during operation and submicron-level defoaming is possible in a short time. Furthermore, the communication function (RS-232C connection) is incorporated, which enables recipe selection, recipe readout, and operation using an external terminal. In addition, such data as the number of rotations can be recorded every second, which contributes to improving traceability in the production process.
-
![THINKY NP-100 NANO Pulverizer]()
THINKY NP-100 NANO Pulverizer
Button- Pulverizing quantity Minimal 100mg (10ml liquid) to Maximal 10g.
- Pulverizing time 2-5 minutes.
- Provides standard recipes for pulverizing.
- Contamination is minimized in a closed container.
- CE certified model is available
- Feature
- Nano Pulverizer NP-100 was designed with an optimized planetary centrifugal ratio to maximize the collision energy. NP-100 has strong centrifugal forces caused by rotation and revolution motion. The centrifugal forces add acceleration to the pulverizing media (zirconia balls) and strongly pulverize materials. Although dry-milling less than 3 micron pulverization is principally difficult, wet-milling enables nano pulverizing.
