Mi150 is an advanced pH/Temp microprocessor-based bench meter. It is ideal for students and technicians who need fast and reliable measurements.

This meter is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of pH, by allowing the user to dramatically improve the reliability of the measurement:

• Automatic Temperature Compensation (ATC) for good accuracy under fluctuating temperatures;

• Easy to read large custom LCD;

• Easy and Quick Push-button Calibration

• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) for calibration;

• Messages on the LCD to make the calibration easy and accurate;

• User-selectable “calibration time out” to remind when a new calibration is necessary;

• Stability Indicator prompts whenever reading stabilizes.

Moreover, it offers an extended temperature range from –20°C (–4°F) to 120°C (248°F),

using the MA831R interchangeable temperature probe.

This high performance economy microprocessor-based pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants.

utomatic Temperature Compensation (ATC) for good accuracy under fluctuating temperatures

Hold functions freezes reading for easy viewing

Easy to read large custom LCD

Stability Indicator prompts whenever reading stabilizes

7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) for calibration

Messages on the LCD to make the calibration easy and accurate

User-Selectable “calibration time out” to remind when a new calibration is necessary

Turbidity refers to the concentration of undissolved, suspended particles present in a liquid.

Turbidity is a measure of the clarity of a sample.

For potable water applications turbidity is a good indicator of water quality.

Turbidity Measurement is achieved by analyzing the amount of light refracted from suspended particles such as clay, silt and organic material.

By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.

Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter.

Mi415 is supplied in a hard carrying case, complete with reagents.

Rande: 0.00 to 50.00 FNU; 50 to 1000 FNU

Resolution 0.01 FNU; 1 FNU

Accuracy ±0.5 FNU or ±5% of reading, whichever is greater

Method detection of scattered light

Light Source high emission infrared LED

Light Detector silicon photocell

Environment 0 to 50°C / 32 to 122°F; max RH 100%

Battery Type 1 x 9V

Auto-off after 5 minutes of non-use

Dimensions 192 x 104 x 52 mm

Weight 380 g

The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.

The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.

Fast, easy-to-read results with large digital LED readout

Repeatable, accuracy to ±1.5% FS

Lightweight and portable

Simple 2 point open air calibration (see video below)

Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor

5 o-rings, membranes and one protective cap included

10 feet probe cable for extra flexibility when testing

70 hours of battery life with continuous use (battery included) with low battery warning

Standard portable meters with no frills! Milwaukee’s durable meters for quick and reliable measurements.

Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW100 performs pH measurements with a 0.1 pH resolution and with manual temperature compensation. The meter is supplied with pH electrode and calibration solutions.

Specifications of Digital Food pH Monitor / Meter Milwaukee (MW100 + MA920B1)

Brand: Milwaukee

MW100 monitor

Scale 0.0 up to 12.0 pH,

Automatic 2 points

Resolution: 0.1 pH

Accuracy: +/- 0.2 pH

Electrode: MA920B / 1

Operating temperature: 0 to 50 ° C (32 to 122 ° F); max RH 95%

Dimensions of the controller: 148.5x82.5x32mm

Weight: 180g

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH values. The pH600 is a pH tester specifically designed for the aquarium market. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH. The pH600 is supplied in a blister packaging complete with calibration screwdriver, batteries and instructions.

Easy to use

Reliable direct readings

Fast response

Simple maintenance

The pH600 is supplied in a blister packaging complete with calibration screwdriver, batteries and instructions.

The pH meter probe for food (MA920B / 1), with cable 1 meter BNC connector, is tipped to enter the food

The MW100 monitor measures with a scale from 0.0 to 14.0 pH, with a resolution of 0.1 pH.

The probe of the pH meter for food (MA920B / 1), with cable 1 meter BNC connector, is tipped to chop food. Combined pH electrode with free diffusion layer connection, Viscolene cell with BNC connector and 1 meter cable

Always remove the electrode protection before use.

In the case that the electrode was left dry, immerse it (up to 2.5cm) a few minutes in washing liquid to reactivate it

Connect the electrode to the socket located above the meter.

Make sure that the meter was calibrated before use.

Immerse the pH electrode (2.5 cm) in the liquid provided.

Turn on the meter by pressing the ON / OFF button

Wait for the data to stabilize before taking the data by the way.

After the measurement, turn off the meter and replace the plug to the electrode with a few drops of storage liquid inside.

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!

The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements.

Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.

Thousands of food and beverage professionals and hobbyists, from chefs and food quality professionals to brewers and wine makers, have moved to digital BRIX measurement from less accurate and less precise optical refractometers.

Fast, accurate results with digital dual level LED readout

Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds

Simple one-point calibration using distilled or deionized water

Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets

Battery percent level indicator with automatic shut-off (batteries included)

Ideal for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers